Caframo Dispersion Blade Set - A400SET

  • SKUCS-1740103
  • MPN:A400SET
  • Availability:In Stock
  • $583.30

Quickly scale up your high shear mixing with this convenient set of three dispersion blades. Set includes 48 mm (1 ⅞ in) A164, 75 mm (3 in) A431, and 100 mm (4 in) A441 blades with set screws. Blades are composed of electropolished 316 stainless steel with an 8 mm (⁵⁄₁₆ in) bore. Compatible with all Caframo shafts. To be used with BDC1850 or BDC3030 overhead stirrers. For high shear mixing at medium to high speeds.

Specifications
  • Blade Diameter

    75 mm (3 in), 100 mm (4 in), 48 mm (1 ⅞ in)
  • Blade Material

    Electropolished 316L stainless steel
  • Bore Diameter

    8 mm (5/16”)
  • Flow Pattern

    Radial
  • Weight

    271.2 g (9.6 oz)
Features & Benefits

Features

  • Electropolished 316 stainless steel
  • High shear

Benefits

  • Quick changes to test and optimize different batch sizes
  • Chemically inert and corrosion resistant
  • Broken particles are efficiently dispersed

Models
CS-1740102   

Set includes 48 mm (1 ⅞ in) A164, 75 mm (3 in) A431, and 100 mm (4 in) A441 blades with set screws. Blades are composed of electropolished 316 stainless steel with an 8 mm (⁵⁄₁₆ in) bore.


Downloads & Videos

Downloads

Faq's
  • How do I choose a mixing impeller?

    To choose an impeller the volume of the mixture, the size of the mixing vessel and the viscosity of the mixture should be known. The diameter of the mixing blade should measure one third of the diameter of the vessel, and be placed a distance of one third the diameter of the vessel up from the bottom of the vessel.

    For thicker mixtures, use a square or “U” shaped anchor paddle. These paddles have more surface area to contact the thick product being mixed. Because thicker mixtures are usually mixed more slowly a paddle diameter closer to the full diameter of the vessel can be used so that the product close to the edge of the vessel is mixed. (A150, A250 are examples of square blade paddles; U022, U044, U055, U510 or A183 are examples of anchor paddles).

  • The paddle I need is not listed on your website. Can you make what I need?

    We are happy to make custom paddles. Email or fax a drawing showing the specifications you need and a quotation outlining a part number, price and delivery will be emailed or faxed back for approval.

  • How do I reduce the vortexing I am experiencing with my propeller?

    A baffle can be used in the vessel to reduce vortexing or the stirrer can be rotated slightly in the clamp so that the mixing shaft is not perpendicular. With the impeller on an angle, the vortex is broken and the introduction of air is minimized.

  • What is electropolishing?

    All stainless steel impellers and blades from Caframo are electropolished. Electropolishing is an electrochemical treatment performed on stainless steel to obtain a smooth, corrosion-resistant finish. This process also passivates the stainless steel by removing elemental iron and increasing the chromium concentration on the surface and nickel just beneath. The result is a chemically inactive part. Note that the process does not coat the part.

    Along with the improved appearance, electropolishing provides the following benefits:

    • Reduces stress-related cracking and metal fatigue
    • Increases the life span of the part
    • Optimizes sterilization as parts are easy and quick to clean

    Electropolished parts are used in the following industries:

    • Aerospace and automotive
    • Water purification
    • Food and beverage
    • Medical
    • Petrochemical
    • Pharmaceutical and cosmetic

  • What are all the parts I need to start mixing?

    To start mixing the following parts are needed: stirrer motor, clamp, stand and mixing impeller. Go to the “Products” section to find the stirrers and accessories available. The Caframo BDC250 Petite stirrer comes as a package. It includes the stirrer motor, integral clamp, stand, and two mixing impellers (axial and straight blade).

  • What shaft diameter will a Caframo chuck accept?

    The same sized chuck is used for all Caframo overhead stirrers with the exception of the BDC250 Petite. The chuck will accept a shaft from 5 mm to 10 mm (3/16” to 3/8″). Shafts are typically 9.5 mm (3/8″) or 8 mm (5/16”) in diameter. The BDC250 Petite chuck will accept a 6 mm (0.24”) shaft.

  • What are the diameters of the A110 and A210 stand rods that Caframo offers?

    The rod for the A110 stand has a diameter of 1” and is 28” long. It can be used with the BDC1850, BDC3030, BDC6015, BDC2002, or BDC2010. The rod for the A210 stand has a diameter of 5/8” and is 24” long. It is used with the BDC2010 or BDC2002.

related products